PERFO Crushed stone permeable vehicle parking

features

technical


PERFO INSTALLED IN CRUSHED STONE

Permeable car parking, PERFO-AK installed in a crushed stone base

for new permeable parking projects
especially effective for upgrading existing car parking areas

For permeable parking applications PERFO-AK anchor tiles are particularly well suited for installation into a granular bedding layer, such as crushed granite or similar materials. The bedding layer is usually prepared on top of a suitable sub-base (e.g. consisting of MOT Type 1 material). The depth of the sub-base will depend on the existing ground conditions and expected traffic loads. For regular cars and light vans, a sub-base depth of 10-15 cm should be sufficient. This should be increased for heavier loads or on particularly unstable ground. The PERFO-AK tiles cannot be installed directly into the sub-base. We recommend the preparation of a bedding layer of crushed stone, such as granite, with a depth of approx. 10 cm after light compaction.

PERFO-AK permeable parking		PERFO-AK permeable parking

PERFO-AK upgraded car park		PERFO-AK upgraded car park

PERFO-SD driveway		PERFO-SD compacted into crushed stone

Permeable car parking for football club

PERFO-SD permeable car parking		PERFO-SD installation into gravel

PERFO-SD installation into gravel base layer		PERFO-SD permeable parking

Back to tracks and vehicles main page

	Download leaflet for Perfo installed in Crushed Stone
	Download leaflet for Perfo installation in Granular bedding layer